E045S
Electronic control unit
Use application field
For 230V swing-leaf gate automations
 |
 |
 |
 |
If interested in this product, see also:
- The E045S electronic control unit can command one or two operators
- Thanks to the new 2easy and OMNIdec technologies it is compatible with the XF 433/XF 868 quick insert module (connector set-up), with the external receivers and with XP 15B and XP 20B D photocells (“BUS” connection).
- The BUS XIB interface is provided for the connection of traditional photocells.
|
Model |
Item code |
|---|---|
|
E045S |
790077 |
|
Model |
E045S |
|---|---|
|
Power supply voltage |
220-240V~ 50/60 Hz |
|
Max. power |
4W Stand by W |
|
Motor max power |
800W |
|
Max. accessories load |
500 mA 24V |
|
Max. electric lock load |
FAAC lock (12V~ – 24V |
|
Programming |
LED display and buttons, via Simply Connect connectivity devices |
|
Status signalling |
Display and LED |
|
Terminal board inputs |
Open, Open pedestrian leaf, Stop (closed), BUS 2easy, Power + Earth |
|
Terminal board outputs |
Lamp, Motors, Accessories power supply 24V2 |
|
Rapid connector |
XF 433/868 module for OmniDEC decoding, USB-A and Simply Connect |
|
Protection Fuses |
1 (2.5A) |
|
Operating ambient temperature |
-20°C ÷ +55°C |
– 500 mA BUS 2easyNote: The E045S control unit can control one or two operators
|
Basic programming |
|
|---|---|
|
Operating logic |
Semiautomatic, Automatic, Semi-automatic step-by-step, step-by-step Auto, Auto Security stepper, Semi-automatic B, C Deadman |
|
Pause time |
Programmable (from 0 to 9 min 50 sec) |
|
Number of motors |
Selectable |
|
Thrust power |
Adjustable on 50 levels for each motor independently |
|
Encoder use |
Selectable |
|
Leaf delay time in closing |
Programmable (from 0 to 1 min 30 sec) |
|
BUS 2-Easy device registration |
Selectable |
|
Motor Power |
1 and 2 (independently) |
|
Working time learning |
Simple self-learning (max 4 min and 10 sec). Self-learning working and deceleration time of two leaves in one complete working cycle only. With SAFEcoder absolute encoder, the open/closed/deceleration positions are learned |
|
Advanced programming |
|
|
Reversing stroke and ram stroke |
Selectable (to facilitate the release and the electric lock) |
|
Leaf delay in opening |
Selectable |
|
Leaf 1 deceleration |
Programmable, percentage of the total stroke (from 0% to 99%) |
|
Leaf 2 deceleration |
Programmable, percentage of the total stroke (from 0% to 99%) |
|
Pre-Flashing |
|
|
Anti-crushing sensitivity |
Programmable there is an ENCODER (10 levels) |
|
Mechanical stop angle search |
Selectable if the ENCODER is present |
|
Files management through USB-A |
|
|
Board software Upgrade |
Selectable |
|
Board configuration Upload |
Selectable |
|
Radio codes list Upload |
Selectable |
|
Configuration download from board |
Selectable |
|
Radio code download from board |
Selectable |
|
Simply Connect |
|
|
The Simply Connect quick connector allows the use of connectivity devices that permit remote programming and management via web and/or App of all the automations connected to the Simply Connect cloud platform: carry out diagnosis, investigate faults, perform remote maintenance and schedule your work |
|
