E045

Electronic control unit

Use application field

If interested in this product, see also:

The E045 can manage one or two opeartors.
Thanks to the new 2easy and OMNIdec technologies it is compatible with the XF 433/XF 868 quick insert module (connector set-up), with the external receivers and with XP 15B and XP 20B D photocells (“BUS” connection).
The BUS XIB interface is provided for the connection of traditional photocells.

Model	Item code
E045	790005

Model	E045
Power supply voltage	Power switching 230V~ (± 15%) 50(60) Hz
Max. power	4W Stand by W
Motor max power	800W
Max. accessories load	500 mA 24V – 500 mA BUS 2easy
Max. electric lock load	FAAC lock (12V~ – 24V
Programming	LED display and buttons
Status signalling	Display and LED
Terminal board inputs	Open, Open pedestrian leaf, Stop (closed), BUS 2easy, Power + Earth
Terminal board outputs	Lamp, Motors, Accessories power supply 24V2
Rapid connector	XF 433/868 module for OMNIDEC, USB DECODING
Protection Fuses	1 (2.5A)
Operating ambient temperature	-20°C ÷ +55°C

Note: The E045 electronic control unit can command one or two operators

Basic programming
Operating logic	Semiautomatic, Automatic, Semi-automatic step-by-step, step-by-step Auto, Auto Security stepper, Semi-automatic B, C Deadman
Pause time	Programmable (from 0 to 9 min 50 sec)
Number of motors	Selectable
Thrust power	Adjustable on 50 levels for each motor independently
Encoder use	Selectable
Leaf delay time in closing	Programmable (from 0 to 1 min 30 sec)
BUS 2-Easy device registration	Selectable
Motor Power	1 and 2 (independently)
Working time learning	Simple self-learning (max 4 min and 10 sec). Self-learning working and deceleration time of two leaves in one complete working cycle only. With SAFEcoder absolute encoder, the open/closed/deceleration positions are learned
Advanced programming
Reversing stroke and ram stroke	Selectable (to facilitate the release and the electric lock)
Leaf delay in opening	Selectable
Leaf 1 deceleration	Programmable, percentage of the total stroke (from 0% to 99%)
Leaf 2 deceleration	Programmable, percentage of the total stroke (from 0% to 99%)
Pre-Flashing
Anti-crushing sensitivity	Programmable there is an ENCODER (10 levels)
Mechanical stop angle search	Selectable if the ENCODER is present
Files management through USB-A
Board software Upgrade	Selectable
Board configuration Upload	Selectable
Radio codes list Upload	Selectable
Configuration download from board	Selectable
Radio code download from board	Selectable